Chyouhwu Huang

Cheng Shiu University

Department of Mechanical Engineering

hongmingbrian@gmail.com

Education

Work Experience

Specialty

Journals

  1. Chyouhwu Huang, H.-S. Chen, Sainbuyan Natsagdorj, J.-C. Hsiung, and J.-N. Lee, "Analysis of the Hot Forging Process parameters of CCM Alloy for Medical Device," Life Science Journal, 2014;11(11). Pages 732-736
  2. Chyouhwu Huang and Hung-Shyong Chen, "The Characteristic Analysis of Interrupted Flow Pulsation on Ultrafiltration System," Applied Mechanics and Materials, Volume 479-480 (2014). Pages 373-379 (EI)
  3. Jeng-Nan Lee, Chen-Hua She, Chyouhwu Brian Huang, Hung-Shyong Chen, and Huang-Kuang Kung, "Toothpath Planning and Simulation for Cutting Test of Non-Orthogonal Five-Axis Machine Tool," Key Engineering Materials; 2014, Vol. 625, Pages 402-407 (EI)
  4. Chyouhwu Huang, "The effect of electrical switch structure to the contact voltage-drop and temperature variations," Applied Mechanics and Materials, Vols. 284-287 (2013). Pages 1109-1115 (EI)
  5. H. S. Chen, Chyouhwu Huang, J.-C. Hsiung, J-N Lee, and H. K. Kung, "The Performance Improvement of the Spring Fastener for the Medical CPU Cooling Plate," Life Science Journal, 2013;10(2). Pages 283-289.
  6. Hung-Shyong Chen, Tsai Yau Bin, Chyouhwu Huang, Jeng-Nan Lee, and Huang-Kung Kung, "The Critical Dimension Deflation of Femoral for Custom-made Total Knee Arthroplasty by the application of Geometric Modeling," Life Science Journal, 2012;9(2). Pages 196-201. (SCI)
  7. Hung-Shyong Chen, Jeng-Nan Lee, Chyouhwu Huang, and Huang-Kung Kung, "The Application of Arc Spray to the Hard Facing of Wear-Resistant Multi-Layer Plate," Advanced Science Letter, Volume 13, Pages 671-674 (30 June 2012) (EI)

International Conference Papers

  1. Chyouhwu Huang, Sheng-Min Kao, Hung-Shyong Chen. Chih-Kun Hsiao, Jeng-Nan Lee, and Yeong-Hua Huang, "The Verification of Bending Strength Analysis Model for Dynamic Compression Bone Plate of Human Lower Limb," 2015 International symposium on Mechatronic and Biomedical Engineering & Applications, Nov. 7, 2015, Kaohsiung, Taiwan.
  2. J-N Lee, C. B. Huang, H.-S. Chen, H.-K. Kung, C.-W Lo and M.-J Shie, "The CNC Machining and Geometry Measurement for Scroll Profile," 2015 International symposium on Mechatronic and Biomedical Engineering & Applications, Nov. 7, 2015, Kaohsiung, Taiwan.
  3. Chyouhwu Brian Huang and Hung-Shyong Chen, "The Buildup of Interrupted Flow Pulsation on Ultrafiltration System," Annual Conference on Engineering and Technology (ACEAT), October 15-17, 2014, Osaka, Japan.
  4. J.N. Lee, C.H. Brian Huang, H.S.Chen and H.K. Kung, "Geometry Design for Globoidal Cam with Oscillating Follower Applied to Circular Loom," 9th International Symposium in Science and Technology at Cheng Shiu University 2014 & 2014 International Symposium on Mechatronics and Biomedical Engineering, Aug 18-20, 2014 Kaohsiung, Taiwan.
  5. Chyouhwu Brian Huang and Hung-Shyong Chen, "The Effect of Flow Pulsation on Ultrafiltration System Limiting Flux Behavior," ASME 2013 International Mechanical Engineering Congress & Exposition (IMECE2013), November 15-21, 2013, San Diego, California, USA.
  6. C. Huang, H.S.Chen, J.-N Lee, J.-C Hsiung and Y. Huang, "The Hot Forged Process Parameters Analysis of Co-Cr-Mo Alloy for Medical Device," 2013 International symposium on Mechatronic and Biomedical Engineering & Applications, Nov. 7, 2013, Kaohsiung, Taiwan.
  7. Jeng-Nan Lee, Ming Yang guan, Chyouhwu Brian Huang, Hung-Shyong Chen and Huang-Kuang Kung, "Geometrical Modeling and Multi-axis NC Machining for the Volar Plate of the Distal Radius," The 16th International Conference on Advances in Materials & Processing Technologies (AMPT2013), Sept. 22-26, 2013, Taipei, Taiwan.
  8. C. Huang, H.S. Chen, I.B. Tsai, J.-N. Lee and Y. Huang, "The Surface Feature application of the Knee Cartilage Tissue to the Custom-made Artificial Knee Joint Design," 2013 International symposium on Mechatronic and Biomedical Engineering & Applications, Nov. 7, 2013, Kaohsiung, Taiwan.
  9. Jeng-Nan Lee, Chen-Hua She, Chyouhwu Brian Huang, Hung-Shyong Chen, and Huang-Kuang Kung, "Toothpath Planning and Simulation for Cutting Test of Non-Orthogonal Five-Axis Machine Tool," The 5th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2013), Nov. 12-15 2013, Taipei, Taiwan.
  10. J.-N. Lee, C.-H Brian Huang, H.-K. Kung and H.-S. Chen, "Five-axis NC machining of cylindrical cam using the generating method," 2013 International symposium on Mechatronic and Biomedical Engineering & Applications, Nov. 7, 2013, Kaohsiung, Taiwan.
  11. Chyouhwu Brian Huang and Hung-Shyong Chen, "The Characteristic Analysis of Interrupted Flow Pulsation on Ultrafiltration System," 2013 International Applied Science and Precision Engineering Conference, October 18-22, 2013, Nantou, Taiwan.
  12. Chyouhwu Huang, J.-C. Hsiung, J.-N, Lee, and K.H. Kung "The Performance Improvement of CPU Cooling Plate Spring Fastener," 2012 International symposium on Mechatronic and Biomedical Engineering & Applications, Nov. 8, 2012, Kaohsiung, Taiwan.
  13. Chyouhwu Huang, "The effect of electrical switch to the contact voltage-drop ad temperature variations," The 2nd International Conference on Engineering and Technology Innovation (ICETI2012), November 02-06, 2012, Kaohsiung, Taiwan.
  14. Chyouhwu Brian Huang and Hung-Shyong Chen, "Heat Insulating materials thermal conductivity determination by mean of comparison with a standard plate of known conductivity," ASME 2012 International Mechanical Engineering Congress & Exposition (IMECE2012), November 9-15, 2012, Houston, Texas, USA.
  15. Hung-Shyong Chen, Jeng-Nan Lee, Chyouhwu Huang, and Huang-Kung Kung, "The Application of Arc Spray to the Hard Facing of Wear-Resistant Multi-Layer Plate," 2011 International Symposium on Mechanical Science and Technology, Dec. 20-21, 2011, Guangzhou, China.

Domestic Conference Papers

  1. 李政男、黃秋虎、陳鴻雄、龔皇光、羅智文, “圓織機空間凸輪機構之幾何設計與五軸數控加工” ,中華民國力學學會第三十九屆全國力學會議,國立台灣科技大學,台北市,2015年11月20-21日。
  2. 陳鴻雄、鍾凱隆、黃秋虎、李政男、龔皇光, “醫療器材用鈷鉻鉬合金熱鍛製程參數分析” ,中國機械工程學會第三十屆全國學術研討會論文集,宜蘭,102年12月。

Technical Reports

  1. 黃秋虎,“無卡軸旋轉切機固定機構之改善” 診斷計畫結案報告, 101年度學界協助中小企業科技關懷計畫,計畫編號: PS101130389,廠商編號: SF1010165 (長正興業股份有限公司),專家編號: SP1010113計畫期程: 101年05月~101年10月。
  2. 黃秋虎, “改良式無卡軸合板旋切機開發一先期計畫: 三角定位系統模式分析報告” ,正修科技大學 工程研究科技中心,正研產學字(101)第106號 ,長正興業股份有限公司委託技術報告,2012年11月1日。

Research Projects

  1. 「工具機切削技術與製程開發」-東台精機股份有限公司委託合作計畫,正研產學字(104)第154,號104/12~106/11, 金額:2,000,000元,計畫主持人。
  2. 「工程用金屬絞線機械性質分析與評估(三) 」-佳大世界股份有限公司委託合作計畫,正研產學字(104)第050號, 104/8~105/7,金額:300,000元,計畫主持人。
  3. 「壓力容器及熱交換器銲接性能評估分析(一)」-中彥工程股份有限公司委託合作計畫,正研產學字(103)第388號, 104/7~105/6,金額:200,000元, 計畫主持人。
  4. 「104-105精密機械製造人才培育學分學程」- 教育部第二期技職再造產業學院計畫,合作廠商: 東台精機股份有限公司 金額: 440,000元(二年共88萬元) 計畫主持人。
  5. 「難削材切削性能與加工技術應用計畫」-新加坡商山高國際刀具有限公司台灣分公司委託合作計畫,正研產學字(103)第237號, 104/1~104/12,金額:500,000元,計畫主持人。
  6. 「抗搖連桿緩衝器性能評估」-春發科技股份有限公司委託合作計畫,正研產學字(103)第212號,104/1~104/12,金額:150,000元,計畫主持人。
  7. 「鐵路用鋼軌墊片性能分析」-春發科技股份有限公司,正研產學字(102)第363號,金額:150,000元
  8. 名稱:「工程用金屬絞線機械性質分析與評估(二) 」-佳大世界股份有限公司,正研產學字(102)第363號,金額:150,000元計畫主持人。
  9. 「精密機械元件加工技術與應用」-東台精機股份有限公司委託建教合作計畫,正研產學字(102)第145號, 102/12~104/11金額:2,000,000元,計畫主持人。
  10. 「多功能風管清潔機器人開發計畫」-育成輔導,居而康實業股份有限公司,正研產學字(102)第001號 民國102年9月1日至103年8月31日。金額:1,021,000元, 計畫主持人。
  11. 「抗搖連桿緩衝器性能評估」-春發科技股份有限公司委託建教合作計畫,正研產學字(101)第328號, 102/4~103/3 金額:150,000元,計畫主持人。
  12. 「改良式旋切機三角定位系統分析」-長正興業股份有限公司,正研產學字(101)第106號,101/11~101/12。金額:300,000元,計畫主持人。
  13. 「沖模模具開發與研製」-高呈實業有限公司委託建教合作計畫,正研產學宇(100)第318號,101/5~102/4,金額:300,000元, 計畫主持人。
  14. 「軌道用扣件及相關產品」-華盛營造工程有限公司委託建教合作計畫,正研產學字(100)第150號,101/1~101/12 金額:100,000元, 計畫主持人。
  15. 「金屬材料機械性質評估與金相分析教育訓練」-中緬有限公司委託建教合作計畫,正研產學字(100)第077號,101/1~101/3。金額:200,000元, 計畫主持人。
  16. 「壓力容器及熱交換器銲接性能評估分析」-中彥工程股份有限公司委託建教合作計畫,正研產學字(100)第003號,100/8~101/7。金額:200,000元,計畫主持人。